We service and repair Zeversolar inverters!
Whether it’s for a service, or if you’re having troubles with your Zeversolar inverter unit, we’re here to help. If you’re after solar power system maintenance, solar inverter repairs, solar power system service or service advice you’ll get only the most honest advice and the highest quality workmanship, to get your lights back on sooner.
Zeversolar (also known as Eversolar) inverters are manufactured in China and distributed via their Melbourne branch.
Their range includes the following models:
- Eversol TL 1500-AS
- Eversol TL 2000-AS
- Zeversol Tl3000-AS
Zeverlution range from 1.5 all the way up to5kW
If your inverter has stopped working, the following tips should help identify the problem:
Check that all three of the isolators are switched on (two of them are located under the inverter - one AC and one DC - and the third is the solar supply main switch in your meter box.) If they are all ‘on’ yet your inverter isn’t working, you may need to replace it under warranty.
Check for fault codes:
- Rly-Check Fault: indicates there may be a faulty component in your inverter. In this case, a warranty replacement will be required.
- ISO Fault or Ground Fault: indicates there may be a problem with your panels which should be investigated prior to any replacement, this makes for a great time to all one of ours out.
In the event you have to replace your inverter under warranty, you will need:
- A copy of your proof of purchase, to show that the inverter was installed within the last five years.
- All of the installation details.
- The inverter serial number which starts with 888xxxx. It is located near a barcode on the right-hand side of your inverter.
Once you have supplied us with these details, we’ll lodge the warranty claim on your behalf. Once we receive a replacement inverter (or gain approval to release one that we already have in stock) we will contact you to arrange installation.
Note: During this process, you might also consider upgrading to a newer model inverter. Zeversolar offers a subsidy for customers who decide to trade-up to a new generation Zeverlution inverter, which also comes with a brand new warranty. Our helpful Customer Liaison team can explain this programme to you upon receiving the warranty approval.
New customers who stick with the same model as their original inverter are likely to require an ‘inverter health check’ which we will charge at a subsidised rate. We strongly recommend this comprehensive system check-up, due to many recalled balance of system items such as DC isolators and some DC cable. This check-up also offers peace of mind that your system complies with the latest installation standards which may have changed since your systems original installation. It also minimises the chances of any external factors shortening the lifespan of your new inverter.
If our technician discovers that your installation is causing the fault (and your inverter is not faulty) then you will need to cover the full cost of attendance.
Even if your inverter is no longer covered by warranty we can still help! Replacements begin at $750 for a 1.5kW inverter. Our experienced technicians can carry out an inverter health check to test your system for faults. They can resolve minor faults on the spot and can provide an onsite quote to resolve any larger issues. If they determine that your inverter cannot be repaired, they can install a replacement inverter during the same visit, saving you further downtime and additional call-out fees.
Contact us today
If you have more questions about your Zeversolar inverter or if you’d like to book an inverter health check fill out the form below or give us a call on 1300 73 93 55.